The Sudbury Ore Car Fleet

It was during the construction of the CPR during the 1880s that copper ore was discovered and sparked a flurry of mineral exploration and mining claims. Since then, Sudbury has been known as a major mining and smelting centre, producing not just copper but becoming a world leader in the production of nickel. As the new railway opened up accessibility to the mineral resources in the area, many mining and smelting companies were incorporated such as The Canadian Copper Company, Mond Nickel, British America Nickle Co. (BANC), Dominion Nickel, International Nickel Co. (INCO), and Falconbridge Nickel.(The first four would later be absorbed by INCO to become the major player on the Sudbury scene.)

Much of this ore would be moved between the mines and the smelters by rail, so transport of both ores and finished products is a major part of the rail scene in the Sudbury area. The mining companies had their own private railways connecting some of the mines, and other mines were served by the “common carrier” railways: Canadian Pacific, Algoma Eastern (later part of CP), and Canadian Northern (later Canadian National).

Sometime around 1910, the Hart-Otis Car Company of Montreal patented a drop-bottom gondola design, whereby doors in the floor of the car could be operated by geared handles on the ends of the car to discharge its load to the sides of the track, which would quickly become popular across Canadian railways with short steel versions of these cars being adopted as the standard car for shipping raw ore for INCO in the Sudbury region.

The Pre-1920 CC&F Cars

cp370094u

CP 370094 was built in 1916 as part of the AE 2801-2925 series and renumbered to CP around 1932. John Brown photo (WRMRC collection), 1970.

The early Hart-Otis design cars used by INCO were a 22’5″ interior length car with 4 drop-bottom doors on each side. Interior bracing give the cars a nice smooth-sided appearance. Canadian Pacific, Canadian Northern (later Canadian National), Algoma Eastern, and INCO themselves all rostered cars to this basic design and size. (When CP went to a larger car size as we will see below, CN and INCO continued to also use cars of this smaller size at some of their operations.)

The CP cars were built (probably by Canadian Car & Foundry in Montreal) in three batches totaling 200 cars between 1914 and 1919. Another 125 were built for the Algoma Eastern, which would later be transferred to CP in the early 1930s after CP leased the AER and absorbed its operations. An unknown number of identical cars were also owned by INCO.

By the 1970s only a tiny handful of these older cars would still survive.

Series #Cars IL Builder Date Note
CP 370000-370124 125 22’5″ CC&F 1916 ex-AE 2801-2925 /32
CP 371200-371239 40 22’5″ CC&F? 1914
CP 371240-371259 20 22’5″ CC&F? 1916
CP 371260-371399 140 22’5″ CC&F? 1919

The 1926-1930 CC&F Cars

CP 376650

CP 376650, built in 1929 by CC&F, at Sudbury yard. Jim Parker photo, sometime in the 1970s.

Between 1926 and 1930 Canadian Car & Foundry (CC&F) built 350 cars (in three batches) for Canadian Pacific to a larger size of 25’11” interior length. The extra 3’6″ of interior length provided an increase of approximately 200 cubic feet over the previous cars and would become the standard ore car size for all new deliveries going forward.

The buttressed ends and riveted Z-shaped side bracing give these cars a rather distinctive appearance among the CP ore car fleet.

In the early 1940s, a number of the cars from this group were rebuilt with side extensions to raise the internal height and add another approximately 300 cubic feet of capacity for service hauling crushed quartz out of INCO’s Lawson Quarry, which began production in January 1942. Other cars from this group were rebuilt in the mid 1970s to convert them from drop bottom to solid bottom cars, which will be mentioned again later further down in this article. A few remained in more or less original condition until retired in the early 1980s.

CP 376809

CP 376809, built in 1930 and rebuilt with side extensions in the 1940s for quartzite service. Jim Parker photo, April 1973.

Series #Cars IL Builder Date Note
CP 376500-376599 100 25’11” CC&F 12/1925-1/1926
CP 376600-376699 100 25’11” CC&F 9-10/1929
CP 376700-376849 150 25’11” CC&F 6-7/1930

The 1942 NSC Cars

CP 376469, built 1/1943 by National Steel Car. Jim Parker photo, sometime in the 1970s.

The next batch of new cars acquired by CP were built by National Steel Car (NSC) of Hamilton, Ontario in late 1942, replacing cars that had been transferred to quartzite service (see above). Similar in overall size specifications to the previous 25’11” cars built by CC&F, interior bracing gave these cars a smooth sided appearance similar to the early pre-1920 22’5″ CC&F cars, but unique among the larger 25’11” cars.

While delivered many years before the Canadian Pacific “script” logo and paint scheme was debuted, the smooth sides lent themselves nicely to repainting with this lettering, and by the 1970s it seems most photos of these cars show them repainted in the 1960s script.

Series #Cars IL Builder Date Note
CP 376350-376499 150 25’11” 11/1942-1/1943 NSC

The 1956-1967 CCF/ECC Cars

CP 376231

CP 376231, built 1967 by Hawker-Siddeley Transportation. Jurgen Kleylein photo, late 1990s.

In the late 1950s, CP expanded their ore car fleet again, with orders in 1956 and 1957 to CC&F and Eastern Car Co. (ECC) of Trenton, NS for 2 virtually identical groups of 100 cars from each builder. Another 60 identical cars from Hawker-Siddeley Transportation (HST), ECC’s successor company, were added on in 1967. These groups of cars were numbered above and below the existing number series for the 1926-1942 cars.

These cars feature riveted body construction with heavier external bracing compared to older cars. The 1967 order would have been the first (and only) ore gondolas to be delivered in script lettering from the factory. The 1956-57 built cars would have been almost identical construction, but painted in the block lettering scheme.

Series #Cars IL Builder Date Note
CP 376190-376249 60 25’11” HST 8/1967
CP 376250-376349 100 25’11” ECC 10/1957
CP 376900-376999 100 25’11” CC&F 11/1956

The 1970 HST Cars

CP 375692

CP 375692 built in 1970 by Hawker-Siddeley. Jacques Richard photo.

CP’s last order of ore gondolas was this 200 car group built by Hawker-Siddeley in November 1970. While extremely similar to the previous cars built by ECC/HST, these are distinguished by being the only all-welded ore cars (the previous cars being of all riveted construction), and the only group of cars to be painted in the CP Rail “Action Red” paint scheme with the iconic “MultiMark”.

Sylvan Scale Models made a resin kit for this car.

Series #Cars IL Builder Date Note
CP 375500-375699 200 25’11” HST /1970

The “Tight-Bottoms”

In the mid-1970s, INCO installed a rotary car dumper at their smelter facility in Copper Cliff, converting to rotary rather than bottom dumping. Some 200 cars originally built between 1926-1942 were rebuilt between 1973 and 1979 to remove the bottom doors and replace them with a solid steel floor. These rebuilt cars were selected and renumbered rather at random into the 375800-375999 series and colloquially known as “tight bottom” ore cars.

Many of the newer cars built after 1956 would later simply have their bottom doors welded shut and door operating levers removed to convert them to “tight-bottom” cars and retain their original numbers, which can actually be seen in the photo of CP 376231 above, which lacks its door operating levers, the doors having been welded shut.

Series #Cars IL Builder Date Note
CP 375700-375799 0 25’11” n/a n/a planned but never filled;
shows in some 1970s ORERs
CP 375800-375899 100 25’11” var. 1926-1942 ex 376350-376499 &
376500-376849 /73-/77
CP 375900-375999 100 25’11” var. 1926-1942 ex 376350-376499 &
376500-376849 /77-/79

The Falconbridge Slurry Cars

CP 381930

CP 381930, built 1969 by Davie Shipbuilding. Bill Grandin collection photo.

Last but not least, we leave INCO behind and head over to competitor Falconbridge Nickel for something completely different. In the late 1960s, Falconbridge decided to ship concentrated ore as a slurry (finely crushed and mixed with water) between their mine and mill near Levack to their smelter at Falconbridge to the east of Sudbury. To ship this ore slurry, CP acquired a group of very unique cylindrical hopper cars that were dedicated to this service between Levack and Falconbridge. These distinctive cars were built in two separate batches in 1967 (delivered in script paint) and 1969 (delivered in Multimark paint) by Davie Shipbuilding. Since rainwater mixing with the slurry wasn’t considered an issue, the openings at the top of the car did not have covers.

The ore slurry was abrasive to the interior of the cars, and with the cars wearing out in the late 1980s Falconbridge switched to shipping by truck and the slurry cars were retired. A few survived however, being used as scale test cars by CP.

Sylvan Scale Models made a resin kit for this car.

Series #Cars IL Builder Date Note
CP 381900-381919 20 19’5″ Davie 12/1967
CP 381920-381959 40 19’5″ Davie 9-10/1969

3 thoughts on “The Sudbury Ore Car Fleet

  1. The slurry cars were open topped, since the slurry wasn’t particularly dangerous and if it rained getting more water into slurry was of no consequence. They just had a narrow slot on top much like a grain hatch, but without the hatch itself.

Leave a Reply to Chris van der Heide Cancel reply

Your email address will not be published. Required fields are marked *